XTEK
Previous Next

Products

Place an order with XTEK

XTEK is a supplier of high-quality protective security, tactical and forensics solutions to the government, law enforcement, military and commercial sectors.

To place an order email to xtek@xtek.net or call us on 1800 500 032.

Should you require any further information or pricing on products, please contact us and one of our friendly team members will assist you.

ImageProduct CodeDescriptionPDF
I.S.A Fingerprint lift tape 50mm x 20m
This is a small more convenient roll of fingerprint tape that allows for additional different products in the SOCO's case.
Crystal-Tabs 145mmx63mm
Crystal Tabs are a convenient perforated finger print and fibre lifting tape on a roll. Just tear off a 145mm piece to lift a print or fibre and replace on the backing to preserve for further investigation (500 per roll).
Jumbo Fingerprint Dusting Brush - Blonde
Supplied with transport tube (blonde filament). Similar in style to the Zephyr type fibreglass mount the synthetic fibres are stiffer and are washable unlike the fibreglass brushes that tangle. There is also the advantage that you can ignore the potential of loose fibreglass fibres.
Skye 2 Fingerprint Brush - Brown
Similar in style to the Zephyr type fibreglass mount the synthetic fibres are stiffer and are washable unlike the fibreglass brushes that tangle. There is also the advantage that you can ignore the potential of loose fibres.
Skye3 Fingerprint Brush Synthetic Copper
Synthetic washable fibre (copper filament). Similar in style to the Zephyr type fibreglass mount the synthetic fibres are stiffer and are washable unlike the fibreglass brushes that tangle. There is also the advantage that you can ignore the potential of loose fibres.
Original Zephyr Fibreglass Filament
Non starched brush supplied on a plastic handle
The Zephyr Brush is the finest brush ever developed for use in fingerprint work. Originally developed in 1956 the 61/2 brush consists of thousands of fiber bundles each composed of more than a hundred individual treated-glass filaments. The diameter of the glass filaments is a fraction of the diameter of hair fibers used in other fingerprint brushes resulting in a product with unsurpassed working qualities. The Zephyr Brush has a long life with the capacity to pick up and retain large amounts of fingerprint powder. Rather than wear out over time the filament ends actually become softer with each use. Do not be misled by imitators claiming superiority for their product. Since 1956 the Zephyr Brush has been the original and continues to be the best fiberglass fingerprint dusting brush available.

Squirrel Hair Fingerprint Brush Domed
These domed squirrel fingerprint brushes are hand finished. The squirrel hair and the handle are joined together with a plastic sleeve double securely wired to both the handle and brush hair.

Available in 5 Sizes:
Size: 4
Size: 6
Size: 8
Size: 10
Size: 12.

White Fingerprint Powder
White powder is useful when greater contrast with a dark-colored background is desired. Use a dedicated brush for white powder to avoid contamination from other colours of powder. Dust the surface and lift the print with white powder the same way you would with black powder. However when you lift the developed print with tape or a Lightning Lift? place it on a black backing card.
Available in 3 different sizes:
250gram Pot
50gram Pot
30gram Pot.

Black Fingerprint Powder
Although old-fashioned black powder is the workhorse of fingerprint development techniques for crime scene use and is also an important method in the laboratory maximizing the effectiveness of powder requires far more sophistication than simply dipping a brush into the jar of powder and painting it onto a surface. More control can be exercised over black powder by working out of a shallow dish.
Available in four sizes:
1kg Pot
500gram Pot
50gram Pot
30gram Pot

Magnetic Powder Jet Black

Magnetic latent print powders are very similar to standard powders but they contain iron which adheres to a magnet. Use a magnetic powder applicator dip it into the jar of magnetic powder the magnetic in the end of the applicator picks up the powder and it becomes a brush.

When the fingerprint dusting is finished move the magnetic applicator over the mouth of the jar lift the end of the applicator to release the powder from the magnet allowing the powder to drop back into the jar.

Magnetic powder is recommended for use in dusting glossy papers tissue paper rough or polished wood leather plastics glass and rubber.

Available in 3 sizes:
500gram Jar
50gram Jar
30gram Jar.

Magnetic Fingerprint Powder Grey 50g pot
Magnetic latent print powders are very similar to standard powders but they contain iron which adheres to a magnet. Use a magnetic powder applicator dip it into the jar of magnetic powder the magnetic in the end of the applicator picks up the powder and it becomes a brush.
When the fingerprint dusting is finished move the magnetic applicator over the mouth of the jar lift the end of the applicator to release the powder from the magnet allowing the powder to drop back into the jar.
Magnetic powder is recommended for use in dusting glossy papers tissue paper rough or polished wood leather plastics glass and rubber.
Wetwop (White) 250ml
Wetwop™ is a pre-mixed liquid that is applied to the adhesive side of tape with a camelhair brush. It can be used to develop prints on any adhesive surface such as masking duct clear cellophane brown packaging and nylon reinforced strapping tapes. Wetwop™ produces excellent friction ridge detail results and has an indefinite shelf-life. No mixing is required when using Wetwop™. UOM per 250ml Pot

Wetwop ? White was developed to process dark colored and clear adhesive surfaces. The solution will stain the residues of the fingerprint deposited on the adhesive surface. In some instances both black and white solutions can be used in sequence to present a contrast for better visualization of the prints.

Wetwop (Black) 250ml Wetwop™ is a pre-mixed liquid that is applied to the adhesive side of tape with a camelhair brush. It can be used to develop prints on any adhesive surface such as masking duct clear cellophane brown packaging and nylon reinforced strapping tapes. Wetwop™ produces excellent friction ridge detail results and has an indefinite shelf-life. No mixing is required when using Wetwop™. UOM per 250ml Pot.

Wetwop™ ? Black was developed to process the adhesive surfaces of all colors. The solution will stain the residues of the fingerprint deposited on the adhesive surface. The solution has little background staining.

White Magnetic Powder 50gram Pot
Magnetic latent print powders are very similar to standard powders but they contain iron which adheres to a magnet. Use a magnetic powder applicator dip it into the jar of magnetic powder the magnetic in the end of the applicator picks up the powder and it becomes a brush.
When the fingerprint dusting is finished move the magnetic applicator over the mouth of the jar lift the end of the applicator to release the powder from the magnet allowing the powder to drop back into the jar.
Magnetic powder is recommended for use in dusting glossy papers tissue paper rough or polished wood leather plastics glass and rubber. White Magnetic Powder is suggested for use on dark surfaces where white contrast is desired.
Superglue - 500ml PERMABOND CPP621
PERMABOND CPP621 is a special cyanaocrylate which has been formulated to give maximum vapour evolution when used in conjunction with the fingerprint cabinet. The product gives more fuming and less residue on heating than the cyanoacrylate adhesives normally used and so costs less per operation.
Allow adhesive to reach room temperature before opening bottle to prevent condensation inside the bottle which can reduce shelf life.
Anti-Static Foam Clean
Used to clean up fingerprint powder as well as removing ingrained grease dirt and dust. Suitable for use on plastic casing hard surfaces and office furniture
Pleasant aroma. Non-flammable. Use with absorbent wipes. 400ml Can
Plastic Powder Pot 60ml
This 60ml powder pot (weith plastic cap) is ideally suited for magnetic powder as the small opening allows the magnetic applicator to pick up the magnet powder easily.
Plastic Powder Pot 148mL (5oz)
This wide mouth plastic powder pot (with plastic cap) is ideal for black and aluminium powders because it allows the brush to enter easily and shake excess off.
Skye 1 Fingerprint Brush Synthetic White Similar in style to the Zephyr type fibreglass mount the synthetic fibres are stiffer and are washable unlike the fibreglass brushes that tangle. There is also the advantage that you can ignore the potential of loose fibres.
Disposable Zephyr Brush
A single use brush for use with single use powders to prevent cross contamination of a crime scene
The Zephyr Brush is the finest brush ever developed for use in fingerprint work. Originally developed in 1956 the 61/2 brush consists of thousands of fibre bundles each composed of more than a hundred individual treated-glass filaments. The diameter of the glass filaments is a fraction of the diameter of hair fibres used in other fingerprint brushes resulting in a product with unsurpassed working qualities. The Zephyr Brush has a long life with the capacity to pick up and retain large amounts of fingerprint powder. Rather than wear out over time the filament ends actually become softer with each use. Do not be misled by imitators claiming superiority for their product. Since 1956 the Zephyr Brush has been the original and continues to be the best fiberglass fingerprint dusting brush available.
1 2

Page 1 of 2